*Ayuda* CSM no me abre los mods.

[nikilaudahunt1]

Hola,como estan como veran tengo este error cada vez que quiero iniciar mods desde el csm,en vez de abrirme el mod,me abre el juego con nada del mod,como decir,con los monoplazas que ya trae el GP4,alguien sabe como solucionarlo? me ayudaria muchisimo,gracias.

 

[phantaman]

I did not understand anything. What kind of mistake? you say there is a problem in the CSM tool (ZaZ GP4 Tools). but put a picture of a lotus which I believe is the 2013 chassis

decida-se aí

 

[nikilaudahunt1]

the error is the CSM did not open the mods, open the original game instead modified,is a problem in the CSM Tool like im post

 

[phantaman]

CSM tool will not work on a GP4 with modified files. you only get success in a standard GP4 (all files intact).

in most, it is install gp4 (full version) and apply official patch ver9.6. and finally install CSM (ZaZ GP4 Tools)

 

[nikilaudahunt1]

Ok,thanks!

 

[nikilaudahunt1]

i do the same and not work :/ i reinstall the gp4,install the patch and the zaz tools and not work

 

[phantaman]

which operating system? is a 64bit system? if so, do as instructed in this topic:

=>

You must be registered for see links

 

[nikilaudahunt1]

is a 32bit

 

[phantaman]

is a 32bit

the instructions in this topic are very useful. possibly some installation procedure must not be correct.
in my opinion, to perform satisfactorily the GP4, a CPU with 4 or more cores, 8GB Ram (minimum) and the video controller (offboard) may be an ATI (Radeon Series 57XX or higher) or nVidia (GTx 460 or higher), both 1GB Ram video, 256bit bus.

If the PC does not meet the minimum described above, the overall performance will be degraded. If it is higher than the above, check everything including the operating system, power supply, memory banks and hard disk there.

good luck